Updated:
Readtime: 9 min
Every product is carefully selected by our editors and experts. If you buy from a link, we may earn a commission. Learn more. For more information on how we test products, click here.
The SHARGE Disk Pro 2 is a pocket-sized SSD enclosure and USB-C hub with active cooling, aimed at anyone juggling phones, laptops, cameras and handheld consoles on the go. For an Aussie bloke shooting 4K on his iPhone one day and gaming on a Steam Deck the next, the pitch is simple, one card-sized unit that keeps storage fast and cool while adding ports you actually use.
The live Disk Pro 2 Kickstarter campaign has already drawn 7,386 backers pledging US$740,159, which points to strong interest in this sort of everyday carry tech. Just remember it’s still a crowdfunding pledge, not a retail purchase, so timelines and final details can shift.
What Is the Disk Pro 2?
The SHARGE Disk Pro 2 is a compact USB-C hub and SSD enclosure that tries to solve two headaches at once, overheating external drives and a lack of ports on modern devices. It combines storage expansion, data transfer, charging and video output in a body about the size of a playing card, so it’s meant to live in your pocket or hang off your phone rather than sit on a desk. The campaign frames it as a single hub for smartphones, laptops, cameras, handheld consoles and more.
Inside, Disk Pro 2 takes a user-installed M.2 NVMe SSD and connects over USB-C for up to 10Gbps transfers, while adding six ports including HDMI and card readers. The makers say it supports SSDs up to 8TB and is tuned for things like iPhone ProRes recording, AAA gaming and shifting hundreds of gigabytes without cooking your drive. If that sounds like your setup, the Disk Pro 2 Kickstarter page lays out the different configurations and accessories.
Disk Pro 2 Design and Build
Disk Pro 2 is pitched as being roughly playing-card sized, which makes it far smaller than most desktop hubs and portable SSD enclosures. The housing wraps an internal M.2 NVMe SSD slot secured with a single Torx screw, and SHARGE includes both the screwdriver and spare screws in the box. A detachable lanyard cable doubles as the main USB-C data and charging lead, so you can clip it to a bag or wrist then plug straight into your phone or laptop when you need it.
Magnets are a big part of the design. The unit can snap to compatible phones and accessories, and there’s an included magnetic ring for non-magnetic surfaces. The campaign also calls out a tough TPE jacket on the lanyard cable with 24 copper conductors inside, claimed to handle PD power, HDMI 2.1 and 10Gbps data at once. If you’re building a clean everyday carry setup, SHARGE clearly wants Disk Pro 2 and its accessories to hang off your kit rather than live in a backpack. You can see the layouts in the product shots on the Disk Pro 2 project page.
How the Disk Pro 2 Works
Functionally, Disk Pro 2 is a USB 3.2 Gen 2 hub and SSD enclosure that connects over USB-C. Inside it uses four separate controller chips to manage its six ports, which are listed as two USB-C, one USB-A, one HDMI and both SD and microSD slots, along with power delivery input and output. You install your own M.2 NVMe SSD (in 2280, 2242 or 2230 sizes, including B&M key) by undoing a single Torx screw, sliding in the drive and fastening it down. Once connected, SHARGE claims up to 10Gbps transfer speeds and support for up to 8TB of storage.
Cooling is handled by what SHARGE calls the Ice-Storm cooling fan, which is rated up to 12,000 RPM and sits behind a larger air intake so there’s airflow even when Disk Pro 2 is flush against a phone or laptop. There are three fan modes, full-speed, auto, and off. In Auto mode the fan ramps from 5,400 RPM to 12,000 RPM based on SSD temperature, and shuts off again when it cools down. The company says it has tuned power draw so low-output devices like iPhones and action cameras can run Disk Pro 2 directly, provided you pair it with an SSD that stays under about 3W. There’s also OTA software for firmware updates as new devices come out. All of this is broken down in charts and diagrams on the Disk Pro 2 Kickstarter listing.
Disk Pro 2 Technical Specifications
Here are the key SHARGE Disk Pro 2 technical details taken from the live Kickstarter campaign.
- Platform: Kickstarter crowdfunding campaign
- Backers so far: 7,386
- Pledged so far: US$740,159
- Interface: USB 3.2 Gen 2 up to 10Gbps
- SSD support: M.2 NVMe 2280 / 2242 / 2230, up to 8TB
- Ports: 2× USB-C, 1× USB-A, 1× HDMI, SD + microSD slots
Disk Pro 2 Pros and Cons
Based on the campaign details, here is how the SHARGE Disk Pro 2 stacks up on paper before you decide whether to back it on Kickstarter.
What We Like
- Compact, playing-card style form factor that suits pockets and EDC setups
- Active cooling with a high-RPM fan and larger air intake to keep SSD temps down
- User-installable M.2 NVMe SSD with support for sizes 2280, 2242 and 2230, up to 8TB
- Six-port layout with USB-C, USB-A, HDMI and dual card readers for flexible workflows
- Designed to run from low-power devices like phones and action cameras without extra power
What to Keep in Mind
- Requires you to supply and install your own compatible NVMe SSD
- Active fan introduces moving parts and potential noise or failure over time
- Heavily dependent on firmware and OTA updates for long-term compatibility
- As a crowdfunding project, delivery timelines and final specs may shift
What to Consider Before You Pledge
Multi-function SSD hubs look tidy on paper, but you’re stacking a few categories into one box, storage, docking and cooling. When you’re weighing something like Disk Pro 2, think about what you actually need day to day. If you mostly sit at a desk, a larger powered dock and a separate external SSD might be simpler and quieter. If you’re often shooting or editing on the go, the appeal here is active cooling, phone compatibility and card readers in a compact shell. You’ll also want to check that your existing drives fit the M.2 NVMe spec and power budget SHARGE outlines on the Disk Pro 2 campaign page.
As with any Kickstarter, this is a pledge, not a guaranteed retail purchase, so delivery can slip and features can change between now and shipping. SHARGE has previous disk products behind it and says it has tested Disk Pro 2 with hundreds of devices, but it’s still early days for this specific model at scale. If you’re happy to wait and accept some uncertainty in exchange for getting in early, it could make sense. If you need a hub or SSD enclosure for work now, a proven off-the-shelf option will be a safer bet.
Man of Many’s Verdict
On paper, the SHARGE Disk Pro 2 looks like a handy bit of kit for creators, mobile gamers and photographers who want fast, cool external storage that works directly with a phone as easily as a laptop. If you live on a single machine at a desk, a conventional dock or desktop SSD might still suit you better. But if your everyday carry already includes an iPhone, a mirrorless camera and maybe a handheld console, this compact cooling hub is worth a look on the Disk Pro 2 Kickstarter while it’s live.
Where to Buy the Disk Pro 2
The SHARGE Disk Pro 2 is available exclusively through its live Kickstarter campaign at the moment. You back the project by choosing a pledge tier on the campaign page, which sets out rewards such as the Disk Pro 2 unit itself and various accessory bundles. Pricing and exact tier contents are all handled directly on Kickstarter, so you’ll need to review the options there before you commit.
Disk Pro 2 FAQs
Disk Pro 2 is a compact USB-C hub and M.2 NVMe SSD enclosure with active cooling, designed to add ports and external storage to phones, laptops, cameras and handheld consoles.
No, Disk Pro 2 is an enclosure. You install your own compatible M.2 NVMe SSD in 2280, 2242 or 2230 format, using the supplied Torx screw and screwdriver.
Backing the campaign means choosing a pledge tier on Kickstarter. The tiers cover combinations of the Disk Pro 2 unit and SHARGE accessories. Check the reward descriptions on the campaign page for the exact inclusions.
Shipping timelines are set by SHARGE on the Kickstarter page and can change. As with any crowdfunding project, treat the listed delivery window as an estimate rather than a fixed retail date.
All current tiers, specs and add-ons are listed on the official Disk Pro 2 Kickstarter campaign page, which is where you’ll also back the project if you decide to support it.
If a pocket-sized, actively cooled SSD hub sounds like it would tidy up your everyday carry, it’s worth a closer look at the live Disk Pro 2 Kickstarter campaign before it wraps.
Comments
We love hearing from you. or to leave a comment.